Crossflow Plate Heat Recovery Wall Mounted Type Fresh Air Dehumidifier
Features:
1. 30mm foam board shell
2. Sensible plate heat exchange efficiency is 50%, with built-in drain pan
3. EC fan, two speeds, adjustable airflow for each speed
4. Pressure difference gauge alarm, filter replacement reminder optional
5. Water cooling coils for dehumidifcation
6. 2 air inlets & 1 air outlet
7. Wall-mounted installation (only)
8. Flexible left type (fresh air comes up from left air outlet) or right type (fresh air comes up from right air outlet)
Working Principle
After outdoor fresh air (or half of return air mixed with fresh air) is filtered by primary filter (G4) and high efficient filter (H10), passes through the plate heat exchanger for precooling, then entering into the water coil for further dehumidifcation, and cross the plate heat exchanger again, undergoing the sensible heat exchanging process to preheat/precool the outdoor fresh air.
Specification:
Model No. | AD-CW30 | AD-CW50 |
Height (A) mm |
1050 | 1300 |
Width (B) mm |
620 | 770 |
Thick (C) mm |
370 | 470 |
Air inlet diameter (d1) mm |
ø100*2 | ø150*2 |
Air outlet diameter (d2) mm |
ø150 | ø200 |
Weight (kg) | 72 | 115 |
Remarks:
Dehumidifcation capacity is tested under the following conditions:
1) The working condition be 30°C/80% after the fresh air mixed with return air.
2) The water inlet/outlet temperature is 7°C/12°C.
3) The operating air speed is the rated air volume.
Selection Program:
Application:
We have other energy saving dehumidifcation solutions such as double heat recovery fresh air dehumidifier for commercial or industrial applications. Please contact our sales team for more information.
Hrv Heat Recovery Ventilator
commercial heat recovery ventilator
Heat Recovery Ventilators
Single Room Heat Recovery Ventilator
Ductless Heat Recovery Ventilator